Gillette SP-410-3-2 | 40kW 3-Phase Natural Gas Generator Set
- 40kW standby-rated, three-phase natural gas generator set
- PSI 4.3L 4-cycle industrial engine at 1,800 RPM rated at 62 HP
- Stamford brushless alternator with Class H insulation
- Deep Sea 7420 digital control panel included
- USA prototype built and 100% load tested
Key Features:
- 40kW / 50kVA standby output at 120/208V, three-phase, 60Hz
- PSI 4.3L 4-cycle naturally aspirated industrial powertrain engine with 9.05:1 compression ratio and 62HP output
- Electronic governor with throttle body actuator for precise isochronous frequency regulation
- Stamford UCI224 brushless alternator with Class H insulation and 130°C temperature rise rating
- Solid-state frequency-compensated voltage regulation standard on all units
- Deep Sea 7420 digital controller with stop/manual/auto modes, full-text LCD display, event logging, power monitoring and hour meter
- Radiator-cooled system with jacket water heater included
- Built-in battery charger, battery rack, cables and charging alternator
- Emergency stop, fuel shut-off solenoid and air-fuel ratio controller included
- Oxidation catalyst and mounted exhaust silencer included
- Heavy-duty circuit breaker standard on all units
- Meets NFPA-110 Level 1 requirements with applicable accessories
- UL-1446 and UL-2200 certified
- Available in Open Frame or Level 2 aluminum sound-attenuated enclosure rated at 64 dBA at 23 ft
Applications:
- Healthcare facilities and hospitals
- Hotels and office buildings
- Medical centers and critical care institutions
- Commercial standby and emergency power
- Light industrial and utility backup
Fuel: Natural Gas (LP/Propane ratings differ, consult spec sheet)
Warranty: 24 months / 1,000 hours (alternator) | 12 months / 2,000 hours (engine)
